Several key points of laser marking machine maintenance

How should we maintain the laser marking machine when it is working?

1. The laser marking machine shall be placed in a dry, clean and ventilated place. The laser marking machine shall be far away from the main channel for workers to work and workpiece transportation. Drying is to prevent the electrical part of the laser marking machine from being affected by moisture and short circuit. Cleaning is to prevent the computer part of the laser marking machine from being damaged by high-voltage static electricity due to ash accumulation. The other is to prevent the memory module from being unable to start up due to ash accumulation affecting normal data reading, as well as electrical faults caused by various processing debris entering the circuit. Ventilation is to improve the working efficiency of the water cooler of the laser marking machine, Keep the laser marking machine module working normally in a constant temperature environment for a long time and stay away from the main channel because the value of the optical path accounts for most of the laser marking machine, and the optical path of the laser marking machine extends outward. The back and forth pedestrians and driving increase the possibility of collision of the extended optical path.

2. The wiring of the laser marking machine should not be touched. Unless the awesome laser marking machine is required to be replaced, the usual operating personnel should not touch the wiring of the laser marking machine. If you want to move, you should turn off all the power supply of the laser marking machine according to the regulations before moving, accurately record the installation position and method of each wiring of the laser marking machine, how to remove and install the connecting wire of the laser marking machine, and do not make any changes.

3. Unless authorized by the manufacturer, the laser marking parameters should not be changed. The marking parameters of laser marking machine are used to specify the marking interface of laser software and define and correct the motion characteristics of Laser Galvanometer Scanning. If the marking parameters of the laser marking machine are changed, the laser track distortion and other consequences may be caused. In general, it is recommended that after the installation and commissioning of the manufacturer, the relevant parameters should be copied under the guidance of the manufacturer's personnel and kept for a long time, so as to be used when the computer poisoning system is reinstalled.

4. When the laser marking machine works, the shell of the laser marking machine may generate static electricity accumulation, which will bring inconvenience to the operator. Therefore, the plug of the laser marking machine is best grounded.

5. In order to prevent the sudden power failure of the laser marking machine caused by poor contact of the plug and the impact of sudden large current in the circuit on the laser marking machine, it is recommended to connect the laser marking machine to the power through the circuit breaker.

6. In order to prevent the laser marking machine from being damaged by lightning, the laser marking machine should be turned off and the power supply of the laser marking machine should be cut off in thunderstorm weather.

Laser marking machine is a kind of precision equipment that fully integrates the five technical fields of optics, electronics, electricity, computer and machinery. During the use of laser marking machine, it should be operated in strict accordance with the regulations. For the safety of laser marking machine and operators, any changes and changes should be carried out with the permission of the manufacturer's technicians in advance.