The failures of CNC carving machine motors and solutions

1. The motors of the CNC carving machines are seriously heated; this is mainly due to the problem of the cooling system of the CNC carving machines, then it is necessary to check whether the circulating water and the water pumps work normally.
2. When the motors of the CNC carving machines are reversed, this is usually caused by the lack of phase of the motor wire, and the output UVW terminal can be directly exchanged to solve it.
3. If there is noise in the CNC carving machines motors, it is generally because there is a fault inside the motors, which needs to be solved by the after-sales service; it may also be due to the excessive load of the motor, and the speed can be adjusted appropriately.

4. If the motor speed of the CNC carving machines is slow, there may be a problem with the power of the CNC carving machine motors; at this time, we can check whether the cable is short-circuited first, or it may be caused by the lack of phase of the motor line.