Briefly introduce 5 tips for maintaining the engraving machine

When it comes to engraving machine maintenance, everyone may be more worried. Good maintenance is very beneficial to the use of the engraving machine, which can also ensure the service life of the engraving machine and better production. There are several maintenance methods for the engraving machine.
1. The continuous running time of the wood engraving machine is less than 12 hours a day to ensure the cleaning of the cooling water and the normal operation of the water pump. Do not run out of water on the water-cooled spindle motor. Regular replacement to prevent the water level from being too high to burn out.
2. After the wood carving machine is used, clean it up within the specified time, and do not leave it unattended. This is because a lot of dust will be generated during use, which will affect the service life. Therefore, be sure to remove the dust on the workbench and the transmission belt after use, and regularly add lubricating oil to the transmission system (X.Y.Z 3-axis).
3. Regular maintenance should be carried out when the machine is not in use. Ensure the flexibility of the transmission system.
4. Regularly clean the dust in the distribution box, check whether the terminal screws are loose, and ensure the safe and reliable use of the circuit. Before opening the power distribution box, please turn off the power first to ensure personal safety.

5. When using the engraving machine, be sure to turn off the power and do not turn it on in the standby state. When the power is turned off, it will affect the life of the machine.