Why is the laser marking machine getting slower and slower?

Everyone is aware of that production-oriented enterprises pay special attention to efficiency, so most factories will use meeting line manufacturing to achieve high processing efficiency. And the laser marking machine that is matched with the assembly line, after a lengthy time of use, I sense that the marking pace is getting slower and slower, so why is the laser marking machine getting slower and slower as it is used?

Next, SUNNA INTL will give an explanation for the reasons for you. Generally speaking, the foremost reasons that have an effect on the velocity of laser marking machines are as follows:

1. The device itself

It must be regarded that the laser marking machine is affected via elements such as laser frequency, laser spot mode, beam divergence angle, and laser power. Therefore, when we are buying a laser marking machine, we must ask the configuration of the laser marking computer manufacturer, pick in accordance to the workpiece, and do not blindly covet the low priced price;

2. Spot size

The density of marking characters will also affect the speed. If the marking area is the same, and the marking depth is the same, the marking density will be higher, and the marking pace will be slower. The character density is high, which is equivalent to directly increasing the area to be marked;

3. Marking format

The large the area, the slower the marking. For example, the marking velocity of large-format marking is slower than that of small-format marking, due to the fact the deflection location of the large-format marking galvanometer will increase;

4. Marking depth

If we carry out in-depth marking and adjust the parameters, it will also have an effect on the marking pace due to the fact it will increase the power, current and different parameters of the marking machine.