How to use laser metal cutting machine?

Before cutting the material, the steps to start the metal laser cutting machine are as follows:

1. Strictly comply with the regulations, comply with the precept of begin and stop, open the machine, and do now not forcibly shut or open;

2. Turn on the air switch, emergency give up switch, and key swap (see if there is an alarm show for the temperature of the water tank);

3. Turn on the computer, and flip on the begin button after the pc is entirely started;

4. Turn on the motor in sequence, enable, follow, laser, and crimson mild buttons;

5. Start the computer and import CAD drawings;

6. Adjust the preliminary processing speed, monitoring prolong and different parameters;

7. Adjust the focus and center of the laser cutting machine.

When starting to cut, the metal laser cutting machine operates as follows:

1. Fix the cutting material, and fix the cutting material to be reduce on the workbench of the laser cutting machine;

2. According to the material and thickness of the metallic plate, alter the gear parameters accordingly;

3. Select the splendid lens and nozzle, take a look at its integrity and cleanliness earlier than beginning the inspection;

4. Adjust the focal size and alter the cutting head to a appropriate center of attention position;

5. Check and alter the nozzle center;

6.  Calibration of cutting head sensor;

7. Select the appropriate cutting gas and check whether the spraying state is good;

8. Try cutting the material. After the material is cut, take a look at whether or not the slicing stop face is smooth, and take a look at the reducing accuracy. If there is an error, regulate the gear parameters for this reason till the proofing meets the requirements;

9. Carry out workpiece drawing programming and corresponding typesetting, and import the equipment cutting system;

10. Adjust the function of the cutting head and begin cutting;

11. During the operation, there need to be team of workers existing to study the reducing scenario carefully. If there is an emergency that requires rapid response, press the emergency end button;

12. Check the reducing nice and precision of the first sample.

The operation steps of the metallic laser reducing computer will be delivered right here first. In order to make certain the reducing impact and work safety, you ought to study the operation guide of the computer cautiously before doing this work. Of course, it is best to let experts function it.